Install a memory DIMM
If you add memory (RAM only) to the HP LaserJet P2015 Series printer, you can print more complex
To install a DIMM, follow the instructions below:
Handling a DIMM (memory) without wearing a grounded, antistatic device might
damage the DIMM. Touch any metal part of the printer or other grounded metal before touching
Use the power switch to turn off the printer, and then unplug all of the cables and cords connected
to the printer.
Open the DIMM door.
Remove the DIMM from the antistatic bag it came in, grasping the DIMM on the top edge.
DIMMs (memory or font)
With the gold contacts facing upward, insert the DIMM in the DIMM seat and press the DIMM body
in until the metal retaining pins click.
Appendix A Accessory/Consumable addendum
Close the DIMM door.
Reconnect all printer cables and cords, and then use the power switch to turn on the printer.