Clean the pickup roller (tray 2)
If you want to clean the pickup roller for tray 2, follow these instructions:
1.
Unplug the power cord from the printer, and allow the printer to cool.
2.
Press the print-cartridge-door button, and then remove the print cartridge from the printer.
3.
Remove tray 2.
66
Chapter 6 Managing and maintenance
ENWW
4.
Open the automatic two-sided path door on the front of the printer (HP LaserJet P2015d,
HP LaserJet P2015dn, and HP LaserJet P2015x printers only).
5.
Place the printer on the work surface with the front of the printer facing up.
6.
Pull the white tabs outward, and rotate the tabs up.
ENWW
Clean the pickup roller (tray 2)
67
7.
Slide the right tab to the right, and leave the tab in this position throughout the procedure.
8.
Slide the pickup roller assembly to the right, and remove the left end cap.
68
Chapter 6 Managing and maintenance
ENWW
9.
Remove the pickup roller.
10.
Dab a lint-free cloth in water, and scrub the roller.
11.
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
12.
Allow the pickup roller to dry completely.
ENWW
Clean the pickup roller (tray 2)
69
13.
Insert the left side of the pickup roller into the left slot (1), and insert the right side (the side that
has the notches in the shaft) into the right slot (2).
14.
Place the end cap over the shaft on the left side, push the end cap to the right, and rotate the tab
downward into position.
15.
Rotate the shaft until the notches engage and the shaft clicks into place.
16.
Push the right tab to the left, and rotate the tab downward into position.
17.
Place the printer on the work surface with the top of the printer facing up.
70
Chapter 6 Managing and maintenance
ENWW
18.
Close the automatic two-sided path door.
19.
Reinstall the print cartridge, and close the print-cartridge door.
20.
Plug the printer in to turn it back on.
ENWW
Clean the pickup roller (tray 2)
71