Automatic two-sided printing path
To clear a jam in the automatic two-sided printing path, perform the following steps:
104
Chapter 7 Problem solving
ENWW
CAUTION
Do not use sharp objects, such as tweezers or needlenose pliers, to remove jams.
Damage caused by sharp objects will not be covered by the warranty.
1.
Open the straight-through output door.
2.
Pull down the green pressure-release levers.
3.
Remove tray 2.
ENWW
Clearing jams
105
4.
Push down on the green lever on the automatic two-sided printing path door on the front of the
printer.
5.
With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the printer.
6.
Close the automatic two-sided printing path door by firmly pushing it up.
106
Chapter 7 Problem solving
ENWW
7.
Reinsert tray 2.
8.
Open the automatic two-sided printing path door on the back of the printer.
9.
With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the printer.
ENWW
Clearing jams
107
10.
Close the automatic two-sided printing path door.
108
Chapter 7 Problem solving
ENWW